My tryst with the Zoom G3X

While my tryst with the zoom 70CDR continues, I happened to see some demos of the Zoom G3X and when I did dig deeper found that this processor in fact is loaded with features. So began my tryst with this Zoom G3X.
At the onset this processor is loaded with the same kind of effects (though not so many) like the MS70CDR (which I love by the way), this has some nice Amp modelling and some decent dirt pedals.
As in my previous blog, the major drawback for me in the MS70CDR were these things…
1.       No easy way to TAP TEMPO the tempo and use the TUNER
2.       No way to use my existing pedals / 70 CDR  in such a way that I could get dotted eighths
3.       Had to use a Amp modelling pedal like the Tech 21 series to get a decent sounding tone when running into the PA /mixer
To address these drawbacks, when I saw the Zoom G3X, I jumped at it.
And when I found out that the same MIDI signals can be used (which I used in the 70CDR), I couldn’t but help, pick this thing up…
Now come the hacks J
I took the old 70CDR Arduino board and tweaked the code and viola, the Zoom G3X now does all I want it to.
1.       Change patches via MIDI
2.       Use TAP tempo and Tuner
3.       Dooooooooooooooootttted eighths delay …
4.       There is one more thing I love  - Ability to switch ON / OFF individual pedals in a PATCH (I am writing code [50% done] to control this thingy via MIDI…


Here are some pics and a demo video of my small pedal board with the MIDI controller and foot switch.








Comments

leigh said…
Hey Lawrence

Nice work. I have built the project for myself with the code you provided, works great. Do you mind if I share the code and schematic?(with credit of course)

Also, I have noticed the need to have the zoom (B3 and B1on in my case) on a certain patch/range of patches when the arduino powers on for it to start functioning, and they are different patches for the B3 and B1on. Do you encounter this?

Thanks again for your code and schem.
Lawrence Doss said…
Leigh - Please go ahead and share them.. would love some comments on my blog / you tube on how they have implemented this.
NO, I have not encountered anything like this. As long as the B3 is connected .. it just works.
Unknown said…
Hello world 😊
Please send some diy instructions on email bogdancat at yahoo com
Unknown said…
Hello world 😊
Please send some diy instructions on email bogdancat at yahoo com
Unknown said…
Please send me diy instructions on email above
Unknown said…
Hi Lawrence, first of all.. ..nice work!

I'm working on a similar project on my G3X, creating a midi-enabler-box, so I can use my midi pedalboard to controll the zoom g3x.

I would like to be in contact with you, to ask some questions if possible.

thanks

see ya
Unknown said…
Hi Lawrence,
Amazing work! I am building a similar controller and I would be grateful if you could send me the code and schematics (manoskomis@gmail.com). If you have also finished code for switching on and of individual pedals, I am interested as well.

Thanks a lot!
nick said…
Hi,
Please send the code and schematics.

wipnickname@gmail.com

Thank you
Ondra said…
Hi Lawrenc,

Very nice work, can you send me schematic?

Very thanks
Ondra - odohnyc@gmail.com
Unknown said…
I asked also for the schematic, but I did not receive it.
Nice work Lawrence! can you please tell if you are willing to share it or not?
Unknown said…
I am very impressed by your ingenuity. Having the ability to change patches externally would be wonderful. May I trouble you to send me the instructions on this procedure?

timrutter1967@gmail.com
Unknown said…
Hi master! I need the code to control the zoom more 70cdr please. I am very impressed!

heber.alejandrob38@gmail.com
Unknown said…
Wow! You're a genius!

I'm trying to know how send MIDI messages to my zoom g3x and I don't know how do that, can you give me a hand? I need a MIDI mapping. thanks!

gnroa.72@gmail.com
Marcos said…
Please send the code and schematics.

10marcos78@gmail.com

Thank you
Marcos said…
Please send the code and schematics.

10marcos78@gmail.com

Thank you
Lawrence Doss said…
Have sent the code and schematics to all who have asked. Please join the forum and also send me your projects.. would love to see how you have implemented this.
Unknown said…
Great man!
Unknown said…
Hi, I am also interested to your project, code and schematics. I would like to try. Thanks
Unknown said…
I was equipped to make the Ashbass mods but I find this the most versatile and brilliant. I'm also interested because I'm curious to know how you did your code to interface with the operating system of Zoom G3. Do not forget me;-) Regards
anon said…
this is relevant to my interest. You have build something beautifull.. can you e-mail me the details? goodie2shoes@gmail.com

thank you!
Unknown said…
HI! you device is great! Could you send me schematics and code? Thanks alot!
vasych@mail.ru
Lawrence Doss said…
Ayra... need your mail id to send man.. :)
Lawrence Doss said…
Have sent the code and schematics to all who have asked. Please join the forum and also send me your projects.. would love to see how you have implemented this
Unknown said…
Hi Lawrence,
Please send the code and schematics. My email is gmarucci@gmail.com. Thanks
Unknown said…
Hi Lawrence, nice, can you please send me also the code and schematics?
Thank you!
Marcos said…
Olá obrigado pelo código para o 70cdr gostaria de receber o código para a G3.
Marcos said…
Olá obrigado pelo código para o 70cdr gostaria de receber o código para a G3.
Luth Oliveira said…
Hi, mister!! That's a incredible invention. Could you , please send me the code and schematics? lutholiveira89@gmail.com
ron3x said…
good day sir, i was about to mod my g3x using ashbass' method but got releaved when i see how u made it using midi controller footswitch! please send me the codes andschematics please��

aaron_yulde@yahoo.com
Greg said…
Hi,

Great invention, can you send me the code and schematics.Thanks gvile01@gmail.com
Hi Lawrence, great work! can you send me the codes and the schematics too?
Thanks - carsmetic.oc@gmail.com
Unknown said…
boa tarde amigo, como faço pra adquirir um controlador midi desse para a minha zoom g3x atravez de voce?
stanley said…
Hi Lawrence, this is absolutely perfect project. Would it be possible to have the schematics/code/information on my mail stanley.ondrus@gmail.com

Thank you very much and have a nice day.
Anonymous said…
Hi Lawrence,
Well done. I would also be thankful for a copy of the code and schematics. It is generous of you to offer it. Thank you.

fretsbr549@gmail.com
Unknown said…
Can you send the information for my email? I have a g3x and like this project. My email is silvadaniel138@hotmail.com
Unknown said…
Can you send the information for my email? I have a g3x and like this project. My email is silvadaniel138@hotmail.com
Ayra said…
This comment has been removed by the author.
Ayra said…
This comment has been removed by the author.
Ayra said…
This comment has been removed by the author.
Cristiano said…
Hi, Please send the code and schematics. cristianoufo@gmail.com Thank you
Unknown said…
This comment has been removed by the author.
Unknown said…
Hi Lawrence,
Nice work. I would like to build that controller and I'll be grateful if you could send me the code and schematics:

web.prijava@gmail.com

Is it possible to connect G3 with computer and controller at the same time?
Thank you.
hoshpack said…
Hi Lawrence,

Great work. Could you share the schematic and the code to hoshpack@gmail.com

Thanks a lot.
J.B. Cholbi said…
Hi Lawrence, Could you share the schematic and code to jbcholbi@hotmail.com

Do you think I can controll the Zoom G3X via MIDI with Ableton Live for live performances?

Thanks Lawrence, I will do my best to make this happen...
Unknown said…
Hi Lawrence!
This work has been done very precisely. I must say: great work man! Can you send me the code and the schematic? I need to get rid of my g3, to play live easily. Thanks in advance!!

dovermman@gmail.com
Unknown said…
Muito bom!! Poderia por favor me enviar o esquema é o código? lucasoliveira.fran@gmail.com
Obrigado
Unknown said…
Hello sir lawrence can you send me the source code of controlling the zoom g3x if its okay with you? Also, the build you made and the schematic is still the same you used at ms70cdr?
mankecik said…
Hi Lawrence!
Great work Man. Could you share the schematic and code to mankecik@gmail.com
Unknown said…
Hello! Could send the instructions to my email? I am willing to buy the arduino and other parts but i want to make sure I'll do it correctly. Thanks for your awesome work! My email is
jedmartin26@gmail.com !!!
Unknown said…
Hello Lawrence!
That is fantastic!!!
Great work Man. Could you share the schematic and code to waltherlly@gmail.com
Thanks for your attention!
XaviMetal said…
Hello Lawrence ! i need to do it to my zoom. Can you send me the code and schem to stalerocker at gmail.com ? Many Thanks
Unknown said…
Please send the code and schematics.
3015gaurav@gmail.com
XaviMetal said…
This comment has been removed by the author.
Cristiano said…
Hi Lawrence, How are you? Congratulations for the project. Can you provide the instrucional, please? My email os crislagatta@gmail.com. Best regards.
Wesley said…
envia codigo?wesleyrodrigo3008@gmail.com
Hello Mr. Lawrence,

I got to your youtube video looking for ways to control the G3x with external MIDI.

If possible, I would like to see the code you are using on the arduino board to send MIDI meseges. Or, point me in the right direction.

Best Regards,

Paulo (padu.costa@gmail.com)
khanpe said…
hi, that is very nice work... would appreciate if you could share how to build. thanks!
peczarkhan@gmail.com
Unknown said…
Hello, please could you send me a project files? arbeitsnlet@bk.ru
I need to build a not large device to read presets on my zoom g3x and to switch digital cab sim. Just receive a preset number then modulo is 0 to 9 will be a preset numbers in speaker sim device. Please, just need help!!!
rahayu said…
Hi,
Please send the code and schematics.

Rahayugroup02@gmail.com

Thank you
Anonymous said…
Are you interested in any kinds of hacking services?
Feel free to contact TECHNECHHACKS.

For years now we’ve helped so many organizations and companies in hacking services.
TECHNECHHACKS is a team of certified hackers that has their own specialty and they are five star rated hackers.

We give out jobs to hackers (gurus only) to those willing to work, with or without a degree, to speed up the availability of time given to jobs!!

Thus an online binary decoding exam will be set for those who needs employment under the teams establishment.


we deal with the total functioning of sites like,


• SOCIAL MEDIA (Facebook, Twitter, Instagram, Snapchat, google hangout etc.)

• SCHOOL GRADES

• IOS/OS

• CREDIT SCORES

• BANK ACCOUNTS

• SPOUSES PHONE

Our special agents are five star rated agents that specializes in the following, and will specially be assigned to you for a special job well DONE.

• WESTERN UNION TRANSFER

• CREDIT CARDS INSTALLATION

• MONEY FLIPPING

• CRIMINAL RECORDS

• BTC RECOVERY

• BTC MINING

• BTC INVESTMENT

Thus bewere of scammers because most persons are been scammed and they ended up getting all solutions to their cyber bullies and attacks by US.

I am Jason williams one of the leading hack agent.

PURPOSE IS TO GET YOUR JOBS DONE AT EXACTLY NEEDED TIME REQUESTED!!!



And our WORK SUCCESS IS 100%!!!



We’re always available for you when you need help.

Contact or write us on:

Technechhacks@gmail.com

SIGNED....!

Jason. W

TECHNECHHACKS
2021©️All Right Reserved

Please send the code and schematics.
Mapa midi please.

Thank you.

eldespojo@gmail.com
Zubbo said…
Verified=Tools=Available

Kali Linux Master Class
D33p/D@rk Web Complete Course
Spamming Tools/Tutorials
BTC Cracker/Flasher
Key LOggers
Hacking Stuff/Books/Tuts
SMTP's
RDP's
C-panel's
Shells
Web-mailers
Mailers/Senders/Bomber
Combos
Carding Cashout/Spamming Methods
Brutes
Premium Cracked Versions
Viruses/RAT's
Scam Page Scripting

7528 22040 I.C.Q
@killhacks Tel Gr

Fresh Spammed & Legit Fullz/Pros/Leads

High CS Fullz (700+)
CC Fullz
SSN+DOB FULLZ
SSN+DOB+DL+Emp Details Fullz
Premium Fullz
Dumps With Pin Codes 101/202 (Good Balanced)
Business Fullz with EIN

7528 22040 I.C.Q
@killhacks Tel Gr

All stuff will be legit & Verified
Invalid found will be replace instantly
Just hit me up Guys

Popular posts from this blog

My tryst with hacking a Zoom MS-70CDR

My tryst with hacking a Zoom MS-70CDR - Part 2